Gå till innehåll

B36 aaaarrrgghhh


Glynn

Rekommendera Poster

Help

 

I am having trouble with a b36 it ticks over nicely but when throttle is opened it dies.

I have the carburettor apart about 20 times and everything looks ok.

 

I have a spring missing from vacuum piston but have tried a stronger one and none and same problem.

 

Hjälpa

 

Jag har problem med en b36 det tömma över fint men när gaspådrag det dör.

Jag har förgasaren isär ca 20 gånger och allt ser ok.

 

Jag har en fjäder saknas vakuumkolven men har provat en starkare en och ingen och samma problem.

Länk till kommentar
Dela på andra webbplatser

Tie the redicilous attempt to emission Control open..  There is an axle through the intake manifold with an butterfly valve in each intake opening that reroutes some air through a slightly longer path..  that axle is moved by a cam..  use a metal wire and tie it open.. That should improve the situation to some extent..

 

It is supposed to make the fuelburn leaner/better somehow..  I had the situation when the Engine was hot..it always started to detonate when moving from idle to full load when hot..

 

Anyway.. this is an easy thing to try for troubleshoting..

 

/ E

  • Like 2
Länk till kommentar
Dela på andra webbplatser

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gäst
Svara i detta ämne...

×   Du har klistrat in innehåll med formatering.   Ta bort formatering

  Endast 75 max uttryckssymboler är tillåtna.

×   Din länk har automatiskt bäddats in.   Visa som länk istället

×   Ditt tidigare innehåll har återställts.   Rensa redigerare

×   Du kan inte klistra in bilder direkt. Ladda upp eller sätt in bilder från URL.

Laddar...
×
×
  • Skapa nytt...