Gå till innehåll

1980 Volvo C202 Parts


Rekommendera Poster

Hello everyone, 

 

I am an owner of a 1980 Volvo C202 and I am in the process of fixing some parts to get it back running. I live in Texas and was looking for help on where to find some parts: The front and rear wheel break cylinder, the car dashboard (speedometerodometerfuel, temperature gauge), and the remote brake fluid reservoir . Thanks! 

post-9477-0-53725100-1438366331_thumb.jpg

post-9477-0-25340200-1438366353_thumb.jpg

  • Like 1
Länk till kommentar
Dela på andra webbplatser

C202 share alot of land rover brake parts

 

Info from http://www.terrangbil.net/forum/index.php?/topic/10273-hjulcylinder-c202-landrover/

Cylinder left front 2 needed

BritPart     GI 52569     Landrover
Girling      600200       Land Rover Series 109 LWB 6 cylinders

Cylinder right front 2 needed

BritPart     GI 54966     Landrover
Girling      600201        Land Rover Series 109 LWB 6 cylinders

Cylinder left rear Land Rover 243297     LR Series II 109 SW w/ 2.6L petrol eng.-1971
Cylinder right rear LandRover 243296     LR Series II 109 SW w/ 2.6L Petrol eng.-1971

Länk till kommentar
Dela på andra webbplatser

  • 2 weeks later...
  • 4 months later...
  • 4 months later...

The parts list for download for your C202 can be found at the top of the page when you open the heading C202 topics. there is a good breakdown of the gearbox in it. It should be a M45 with FD51 transfer box. Well that's what I put in my 1978 C202.

I found that the clutch driven plate/disc was the same as used in a Bedford C F Van. 10 spline ,1 inch center hole. The clutch pressure plate is the same as from a landrover series 2 or 3 I think. Borg and Beck 50052/ 52509

Both I managed to get on Ebay and are fitted and working.

Sorry I can not be more specific.

  • Like 1
Länk till kommentar
Dela på andra webbplatser

Much thanks to tajmam and kjell niklasson for your in put but do u noe were I can get them I have been taking a part some other parts of the tranni and transferbox and am looking for this partssynchonizing cone. 4 of them I have the parts manual that I down loaded from this site but dont have an idea as to where I can get them con any one help me with this the most moptant parts are1 the input shaft 1220310_5 ,4 synchronizing cone they are all the same # 1232616_1or 1220327 .companion flange 1220325_3 qt of 8. Need bearing 1381565_9 I would be very thank full for your help with this if u should ever should need so.e this from boliviaor come down just call.

Länk till kommentar
Dela på andra webbplatser

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Gäst
Svara i detta ämne...

×   Du har klistrat in innehåll med formatering.   Ta bort formatering

  Endast 75 max uttryckssymboler är tillåtna.

×   Din länk har automatiskt bäddats in.   Visa som länk istället

×   Ditt tidigare innehåll har återställts.   Rensa redigerare

×   Du kan inte klistra in bilder direkt. Ladda upp eller sätt in bilder från URL.

Laddar...
×
×
  • Skapa nytt...